Factory direct and family owned since 1964. South Gate delivery and set-up: 800-233-7382

Hospital Beds for South Gate Homes

In South Gate, homes are full of family, and when someone needs care, everyone pitches in. Grandparents live in the back house, cousins share rooms, and caregiving happens around work shifts and school runs.

A bed that rises, lowers and repositions at a touch makes that care safer for everyone. Our Latexpedic latex mattresses are handmade in our Burbank factory and built to last for decades, and we deliver and set up both in your South Gate home.

Showroom
Burbank
Distance
20 miles
Warranty
20 years
South Gate, California, in southeast Los Angeles County along the Los Angeles River. Electropedic delivers and sets up beds here from our Burbank showroom.

Six Beds, Six Numbers That Matter

Each bed starts with the one figure that makes the difference for a South Gate family, then tells the story behind it.

2piece split frame

Comes apart to fit through a narrow side yard to the back house.

Tuffcare Century

Long Term Care Bed T7036 and T7042

Tuffcare Century T7036 fully electric long term care bed with half rails and five-function pendant
Tuffcare Century T7036. The T7042 is the same bed, 42 inches wide.

When Grandpa insists on staying in the back house.

The problemHe has lived in the little house behind yours for twenty years, and he is not moving into the main house now, even after his stroke. The only way back there is a narrow walk along the side of the garage.

Why it mattersA one-piece hospital bed will not make the turn, and without a proper bed back there, the family has to lift him by hand several times a day.

The answer

The Tuffcare's two-piece split frame comes apart for delivery and goes back together beside his window. Once it is set up, its five-function pendant handles height, head, foot, Trendelenburg and reverse, optional half rails give him a grip, and a backup battery covers up to 7 minutes in an outage. He keeps his independence; the family keeps their backs.

  • T7036: 36 x 80 in., to 600 lb.
  • T7042: 42 x 80 in.
10.5inches, frame height

Low enough to sit with your feet flat and legs hanging comfortably.

Transfer Master

Supernal 3 Hi-Low

Supernal 3 Hi-Low bed with upholstered frame and hidden motors in a furnished bedroom
Supernal 3 Hi-Low by Transfer Master.

When your legs only stop hurting if you let them hang.

The problemPoor circulation in your legs causes aching at night that eases only when you sit up and let your feet hang down. On your tall bed, your feet dangle in the air, and the edge cuts into the backs of your thighs.

Why it mattersYou end up sitting on the edge of the bed half the night, cold and uncomfortable, and sleep comes in short pieces.

The answer

Lower the Supernal 3 so you can sit with your feet resting flat on the floor, then raise the head behind you for support while you sit. When the ache eases, recline and sleep. An optional support rail moves with the bed, and the upholstered frame looks like an ordinary bed. Talk with your doctor about leg pain at night.

  • Hi-low, head and foot
  • Twin XL, Full XL, Queen, Dual King
1button to tilt the whole bed

Head down or head up, the entire bed moves as one flat surface.

Transfer Master

Supernal 5 Adjustable Bed System

Supernal 5 Adjustable Bed System with whole-bed tilt and hi-low in an upholstered frame
Supernal 5 Adjustable Bed System by Transfer Master.

When Grandma has fainting spells.

The problemYour grandmother sometimes feels faint, and her doctor told the family that when it happens she should lie down with her legs raised. With pillows and a regular bed, it takes too long and never feels quite right.

Why it mattersEvery spell is a frightening scramble, and the family is afraid to leave her alone.

The answer

The Supernal 5's Trendelenburg tilts the whole bed so her legs rise above her head in a few seconds, and foot elevation adds more lift, exactly as her doctor described. Reverse Trendelenburg, head elevation, zero gravity and hi-low height cover the rest of her day. Use positions only as her doctor directs, and call for help in an emergency.

  • Trendelenburg and reverse
  • Twin XL, Full XL, Queen, Dual King
2independent sides

Each of you sets your own head and foot, on your own mattress.

Flexabed, hand-built since 1969

Flexabed Hi-Low SL

Flexabed Hi-Low SL three-motor fully electric hi-low bed
Flexabed Hi-Low SL.
Flexabed Hi-Low SL with optional side rails
Optional side rails.
Flexabed Hi-Low SL lowered to its lowest safety position
Lowest position.

When you both have bad backs, just not the same bad back.

The problemHis lower back hurts unless his knees are raised. Her neck and upper back ache unless her head is up. On one flat mattress, every night is a compromise neither of you wins.

Why it mattersOne of you always wakes up in pain, and lately one of you has been drifting off to the couch.

The answer

On a split Flexabed Hi-Low SL, he raises his knees and she raises her head, at the same time, on separate mattresses that move independently. The vertical lift raises the whole bed so standing is easier in the morning, and it lowers to about 16.5 inches with a mattress at night. Hand-built to order in Georgia.

  • Vertical hi-low lift
  • Twin, Full, Queen, Dual King
0lights to switch on

Underbed lighting comes on by itself when your feet touch the floor.

Dawn House Living

The Dawn House Bed

Dawn House smart hi-low bed with upholstered frame
The Dawn House smart bed system.
Dawn House motion-activated underbed lighting glowing softly
Underbed lighting.
Dawn House app with sleep reports
Sleep reports.

When you do not want to wake the whole house.

The problemYou live with your son's family, and the house is full: grandchildren down the hall, a nephew on the couch. You need to get up at night, but you hate switching on lights or calling for help and waking everyone.

Why it mattersSo you shuffle through the dark, holding onto furniture, and one night you are going to miss a step.

The answer

The Dawn House's underbed lighting glows softly the moment your feet touch the floor, lighting your path without lighting the house. Hi-low height makes standing steady, and quiet voice control means no fumbling for a remote. Sensors in the base track your sleep and heart rate, so the family can check on you through the app without knocking on your door.

  • Motion-activated lighting
  • Voice, app or remote
7°full-bed tilt

A gentle incline from head to toe that does not slip away overnight.

Ergomotion

Ascend High-Low Adjustable Bed with Tilt

Ergomotion Ascend high-low adjustable bed with head raised
Ascend by Ergomotion.
Ascend high-low adjustable bed in a full-bed tilt
Full-bed tilt.
Optional support rail for the Ergomotion Ascend bed
Support rail.

When your doctor says sleep propped up after a tonsillectomy.

The problemHaving your tonsils out as an adult is no small thing. Your doctor wants your head raised while you sleep for the first week or two to help with swelling, and every swallow hurts.

Why it mattersYou prop yourself on pillows, slide down in the night, wake with a throat on fire and start the long day exhausted.

The answer

Raise the Ascend's head to the angle your doctor recommends, or tilt the whole bed up to 7 degrees for an even incline, and save it on a preset so it stays put every night. About 7 inches of hi-low lift lets you get up gently for water and medicine, and underbed lighting shows the way. Follow your surgeon's recovery instructions.

  • Three presets
  • Twin XL, Full, Queen, Split King

Setting Up a Bed in a Back House

Many South Gate families keep a grandparent close in a back house or converted garage. Here is how to get a hospital bed in and set up safely.

Close by, but on their own

A back house lets an older family member keep their privacy while help is only steps away. The challenge is usually the route: a narrow side yard, a gate, a step or two and a small doorway.

Measure the route before you call 800-233-7382, and we will recommend a bed that will make it through and plan the delivery around it.

  • The side yardMeasure its narrowest point, including gates, meters and anything stored along the wall.
  • Steps and thresholdsNote any steps up into the back house and the height of the door threshold.
  • The doorway and roomMeasure the door opening and the room, leaving space on one side of the bed for care.
  • PowerA grounded three-prong outlet near the head of the bed, not an extension cord across the floor.
  • A path at nightLighting between the bed, the bathroom and the main house.
  • A way to callA phone or intercom within reach so help in the main house is never far.

Latexpedic Natural Latex Mattresses

Handmade one at a time in our Burbank factory and sold factory direct, built for homes where the bed rarely gets a day off.

The Ultimate 12-inch Latexpedic latex mattress with three layers of natural latex
The Ultimate: three layers of resilient natural latex.

When the bed never gets a day off

In a busy household, a bed works hard. One person sleeps there at night, another naps there after a night shift, the grandkids pile on for cartoons on Saturday, and somebody sits on the edge every time a visitor comes. An ordinary mattress gets a permanent dip in a couple of years.

A Latexpedic is natural latex from top to bottom: dense, resilient and quick to spring back. It is fully reversible and quilted on both sides, so you can flip it to share the wear, and sturdy handles make turning it a two-person job instead of a struggle. It is backed by a 20-year limited warranty.

Factory direct
Made, sold, delivered and guaranteed by Electropedic, with no middleman.
Handmade, one at a time
Each mattress built individually by hand in Burbank.
Fully reversible
Latex from top to bottom, so it can be flipped for even wear.
Quilted on both sides
Cotton and wool on each face.
Handles and a zipper
Easy to turn; the firmness can be changed later.
20-year limited warranty
From a family in the bed business since 1964.
Latexpedic 7-inch natural latex mattress

7-Inch

Low profile

Made for hi-low beds and easy transfers, light enough to turn with ease.

Latexpedic 10-inch natural latex mattress

10-Inch

Most popular

A comfort layer over firm latex support, the height most customers choose.

The Ultimate 12-inch Latexpedic latex mattress

12-Inch

The Ultimate

Three independent latex layers, each in the firmness you choose.

Four Firmnesses

The 7-inch, 10-inch and 12-inch models are each made in all four firmnesses, softest to firmest.

  1. Soft

    Cradling comfort for side sleepers.

  2. Regular Firm

    Balanced support for most people.

  3. Extra Firm

    Firm, lifting support for back sleepers.

  4. Ultra Firm

    Our most structured surface.

Latexpedic in Pictures

Twenty-four photographs of the mattress, its materials, the beds it pairs with and our factory.

Latexpedic natural latex mattress made up in a bedroom
A Latexpedic, made up and ready for years of use.
Latexpedic natural Talalay latex mattress
Natural Talalay latex.
Latexpedic certified organic latex mattress
Certified organic.
Latexpedic natural latex mattress from the Electropedic collection
From the collection.
  • Latexpedic latex mattress on display in the Burbank showroom
    In the showroom.
  • Cutaway of a Latexpedic mattress showing natural latex layers
    Latex inside.
  • Latexpedic mattress with zippered cover and carrying handles
    Handles and zipper.
  • Reversible Latexpedic latex mattress quilted on both faces
    Quilted both sides.
  • Completely reversible Latexpedic latex mattress
    Fully reversible.
  • Talalay latex core rated for firmness and support
    A rated core.
  • Natural latex mattress conforming to the body and springing back
    Springs right back.
  • Illustration of a latex mattress relieving pressure at shoulders and hips
    Pressure relief.
  • Cotton, wool and latex layers of a natural Latexpedic mattress
    Three ingredients.
  • Dawn House hi-low bed with a Latexpedic latex mattress
    On a Dawn House.
  • Flex-A-Bed hi-low bed with a Latexpedic latex mattress
    On a Flex-A-Bed.
  • Dual king electric adjustable bed with latex mattresses
    A dual king.
  • Natural latex mattress on an electric adjustable bed
    On an adjustable.
  • Twin adjustable bed with a Latexpedic latex mattress raised
    A twin, raised.
  • Latexpedic latex mattress from the Electropedic gallery
    Finished by hand.
  • Latexpedic natural latex mattress ready for delivery
    Ready for delivery.
  • Natural Talalay latex foam
    Talalay latex.
  • Natural cotton used in Latexpedic quilting
    Cotton.
  • Sheep wool used as the natural fire barrier in Latexpedic mattresses
    Wool.
  • Electropedic factory in Burbank where Latexpedic mattresses are handmade
    Our factory.

Serving South Gate

What we have learned delivering across South Gate, and the questions families here ask first.

From Tweedy Boulevard to Hollydale

South Gate's neighborhoods, from the blocks around Tweedy Boulevard and South Gate Park to Hollydale near the river, are full of older single-story homes on compact lots, often with a back house or converted garage. We plan every delivery around your home's side yards, steps and doorways.

Home from a nearby hospital

South Gate families often call us after a stay at St. Francis Medical Center in Lynwood or a hospital in nearby Downey. As soon as you know the discharge date, call us so the bed can be delivered and set up before your family member comes home.

Twenty miles to Burbank

Our Burbank showroom is about 20 miles away. Bring the person who will use the bed, try the heights and firmnesses, and let us take care of delivery and set-up back home.

South Gate questions

Do you deliver to South Gate?

Yes. We deliver and set up hi-low beds and Latexpedic mattresses throughout South Gate, including back houses. Call 800-233-7382.

Can a bed go in a back house?

Usually, yes. Measure the side yard, steps, doorway and room, and check for a grounded outlet. Split-frame beds are easier to carry in.

How long does a Latexpedic last?

It is dense, resilient and fully reversible, and every one carries a 20-year limited warranty.

How far is your showroom?

About 20 miles by the I-710, I-5 and SR-134. Plan on 30 to 50 minutes depending on traffic.

Do you rent hospital beds?

Yes, by the month, and we buy, sell and trade used electric beds. Financing is available on qualifying purchases.

Electropedic Showrooms

South Gate is served by our Burbank showroom and factory. Our Phoenix showroom serves Arizona.

Electropedic Burbank

Serving South Gate and Southern California

907 N. Hollywood Way
Burbank, CA 91505

800-233-7382

Monday to Saturday, 10 a.m. to 5 p.m.
Sunday, noon to 4 p.m.

Showroom and Latexpedic factory. Delivery, set-up and service.

Electropedic Phoenix

Serving Arizona

1035 E. Camelback Road
Phoenix, AZ 85014

800-733-1818

Monday to Saturday, 10 a.m. to 5 p.m.
Sunday, noon to 4 p.m.

Delivery, set-up and service.

Directions from South Gate to Our Burbank Showroom

The drive from South Gate to 907 N. Hollywood Way, Burbank, about 20 miles.

North along the river

  1. Take the I-710 Long Beach Freeway north from South Gate to the I-5.
  2. Follow the I-5 north past downtown Los Angeles and Griffith Park, then take the SR-134 Ventura Freeway west.
  3. Exit at Hollywood Way and drive north about a mile. We are half a block south of Magnolia Boulevard.

Traffic changes the best route; the map always shows today's.

Call 800-233-7382 before you leave and we will have your beds ready.

Electropedic Burbank, 907 N. Hollywood Way, Burbank, CA 91505. Open these directions in Google Maps.